Step-by-step Guide to Installing a New Shower Unit

Step-by-step Guide to Installing a New Shower Unit

Blog Article

Browse Our Site

Just about everyone has got their own unique views on the subject of How to Install a Direct-to-Stud Shower Enclosure.

A successful shower setup requires cautious planning and also a lot of job. Most of the times, you will require to do 3 kinds of jobs: framing walls, installing the plumbing, and completing wall surfaces.

Prep work

To start with, you should decide on the kind of shower that you wish to install. It is very important to ascertain whether the chosen shower can dealing with specific systems as well as can control a secure level of water via the boiler. Most shower units nowadays are developed to be adaptable to various water stress (such as stored warm water and also chilly keys).
It is likewise vital to take into consideration the water pressure as well as the preparation of the piping and also drainage for the shower

Different Sorts Of Shower Units

Push-on Mixer: The hose pipe and also spray parts of the push-on mixer shower system can be linked to the bath tap as per your requirement, as well as the water temperature can be changed through the taps. Push-on mixers are cheap and also incredibly easy to install. However, although the pipe link is simple, it is conveniently removed. Furthermore, it is inconvenient to adjust the temperature level.

Bath/Shower Mixer: The tube as well as spray of this type of shower are combined with a bathroom mixer faucet, and also the temperature can be changed via the bathroom faucets. It is a very low-cost option and also no extra plumbing is entailed. Nevertheless, the bath/shower mixers additionally experience troublesome temperature level control options.

Guidebook Mixer: The hose as well as spray of a hand-operated mixer shower unit are a part of the wall surface system as well as the cold and hot water supplies are linked to a single valve The temperature level and stress of the water are managed with either one or a selection of knobs (in extra expensive showers). Although temperature control is a lot easier in manual mixer kinds, they are more costly than the formerly mentioned mixers. They additionally need extra plumbing of cold and hot supply of water pipes.

Thermostatic Mixer: The tube and also spray of this shower kind are a part of the wall system as well as the hot and cold water materials are linked to a single valve right here also. It is full with a built-in stabiliser to self-adjust the water temperature level as well as to avoid it from ending up being as well warm. One of the most significant benefits of a thermostatic mixer shower type includes practical temperature control. However, it is one of the most costly of the various mixer choices.

Power Shower: A power shower is a single unit having an effective electrical pump that can modifying both the water stress as well as temperature. This sort of shower can be fitted if there is water from a cold water tank as well as a hot water cylinder. A power shower makes the adjustment of both stress and temperature level easy. On the other hand, it is unsuitable for water heated up straight by the shower or where the water is supplied by a combination boiler under mains stress.

Electric Shower: An electric shower is plumbed right into a mains cold water supply as well as it heats the water electrically. It is important to note that for this shower kind to be mounted, the keys pressure needs to be at the very least 0.7 kg/sq centimeters (10lb/sq in). The unit enables the temperature as well as pressure to be changed via a handle. Versions with temperature stabilisers are better as they stay unaffected by other faucets somewhere else in use within the home. A major disadvantage of electrical showers is that the control handle only enables the option of high temperatures at less stress, or lower temperature levels at a greater stress. This is bothersome in the winter when the spray is often weak as well as the keys water is chillier. Nonetheless, this problem is taken on in some designs which are readily available with a winter/summer setup.

Method

Relying on the kind of shower you desire to mount, the shower head need to either be suited order to prevent its contact with the water in the bath below or the base tray, or it needs to have a check shutoff.
Prior to starting, it is advisable to note the settings of the shower head as well as control, as well as to plan the pipe-work entailed. In addition, the water drainage system to remove the waste water will require to be intended. Both placements of the cord path and also the shower button will certainly also require to be thought about if an instant or electric shower unit is being set up.
Utilize the guideline overview provided with the shower system to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is very important to remove the supply of water. In order to protect the pipelines, they need to be provided a waterproof covering as well as additionally fitted with isolating valves. The pipelines can after that be buried into the wall surface as well as plastered over to neaten the overall appearance.
Fit the base tray, shower head, and also installations.
Attach the primary shower control to the pipes that will be supplying the water (This may need a female screw string adapter).
Reconnect the water system as well as examination the pipes for any kind of leaks, as some might need firm.
If you are installing an electric shower, bear in mind to turn off the electricity supply before making any kind of electrical links. When these connections have been made (there need to be advice within the instruction manual), the power supply can be changed back on.

Adjusting Water Stress to Match Your Shower

The cold water storage tank can be lifted to a better height (sometimes as little as 150mm (6inches)) by installation a solid wooden assistance underneath it - potentially composed of struts as well as blockboards. If you choose this option, the main as well as distribution pipelines will likewise have to be raised to meet the new height of the tank.
Conversely, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is selected, it should be attached right into the power supply in order to operate.

Piping and also Drainage

It is best to utilize 15mm size supply pipes, and also make the go to the shower as brief and also straight as possible so as to keep maximum stress and also reduce heat loss. Furthermore, by minimising the use of elbow joints for pipe corners, you can lower the resistance in the circulation of the water system. You can accomplish this by bending the pipes rather.

A Lot Of Typical Errors

Breaking or ignoring local code constraints.

Making use of pipelines that are also little.

Attaching copper to galvanized without using a brass or dielectric fitting between the two.

Not utilizing tape or pipeline compound at threaded joints.

Not leveling your components when installing them.

Not mounting an air space loading for components.

Cutting supply stub outs also brief to mount the shutoff valves onto after the ended up wall is in area.

Not appropriately aligning tubes right into fittings or stop valves. (Forcing the nut onto the compression ring at an angle when the tubing is at an angle will create a leakage.).

When transforming the water back on in your home, constantly run the outdoors tube valve or purge your commodes to hemorrhage dirt and air from the lines. This particles can create problems in your sink taps and also various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Do you like reading up on How to Install a Direct-to-Stud Shower Enclosure? Create a remark further down. We would be interested to see your opinion about this article. Hoping to see you back again soon. Those who enjoyed our blog entry kindly be sure to pass it around. Thank-you for your time invested reading it.

Book A Service

Report this page